Adjusting the Beater on Wolf and Floor Looms

If you have found that your beater does not come up square to the front beam, the first and most important thing to check is the level of the floor, as an un-level loom will cause the beater to go slightly out of square. Check the level of the loom by placing a level on […]

Read More

Standard Floor and Wolf Loom Brake

– Brake Won’t Hold Inspect the brake hub (you don’t need to remove it to do this). If the hub is grooved, the cable will not hold properly. Most often grooves will appear at either edge where the hub butts up against the hub flanges. If you find grooves, the brake hub needs to be […]

Read More

Sticky or Floating Harnesses

Easy Fixes – Check to make sure that the loom is level. To check level, place a level across the front beam and then the back beam. If the loom is not level, you can place a wood shim or rubber level (found at hardware stores) under one of the legs. You can also try […]

Read More

Selling old equipment

We do not buy back used equipment, and are unable to provide information on the value of used equipment since this depends heavily on the condition of the equipment and your local market. See the Price List for information on current retail prices or contact a local Schacht Retailer for assistance.  

Read More

What is a “Four Now – Four Later” Loom?

“Four Now – Four Later” (4N4L) is a loom shipped with four shafts installed, and with the capacity to add an additional four shafts. You can purchase a kit to add four shafts at a later time. 4N4L looms are shipped with all the treadles, heddles, tie-ups and other items normally included with an eight […]

Read More

All Loom Serial Number History

We’re happy to help you with any problems you may have with your Schacht equipment. Before you call, verify the type of loom and have the serial number ready. Especially for older equipment, we can’t effectively help you without this information. Some very early looms were not assigned serial numbers. If your loom was built […]

Read More