Directions

1. Warping: Using the direct peg warping method, sley some slots and leave others open in a random manner in this way: s2 o3 s1 o2 s2 o3 s1 o1 s1 o2 s2 o3 s1 o1 s1 o2 s2 o3 s2 o2 s1 o1 s1 o2 s2 o2 s1 o2 s2. Note: s= sley, o=open, as in s2= sley two slots, o3=leave 3 slots unthreaded, and so on.

2. Weaving: Using Grass weave 8 picks of balanced weave, then leave one inch open or unwoven (you can use a thin cardboard as a spacer across the warp if you find that helpful, removing it after the next 8 picks are woven). Alternate in this manner for the entire length of the warp.

3. Finishing: Remove from the loom and secure the ends by tying the warp threads in groups of 4. Wash the fabric in the washing machine with detergent on warm with on a short cycle, checking often so as to not over full. Place the fabric in the dryer with a bath towel for 30 minutes on medium heat, checking the fabric every 5 minutes or so. Tighten any loose knots and cut off the excess warp near the knot.