Beam with Teeth for School Loom

Individual teeth on this loom cannot be repaired—the entire beam must be replaced.

1. If you're replacing the bottom beam, undo the knot in the texsolv cord. Remove the cord from the bottom beam.
2. Remove the sheet metal screws holding the beam to the loom sides.
3. Set the new beam in position, making sure the teeth are oriented as shown in the diagram on this page.
4. Reattach the screws firmly.
5. For the bottom beam, thread the texsolv cord through the hole. Tie an overhand knot in the cord so it cannot slip back through the hole.