Matchless front maidens
Front Maidens and Bearings for Matchless
Matchless front maidens
Front Maidens and Bearings for Matchless

Front Maidens and Bearings for Matchless

$9.00 Sale • Save
Style

SKUR-12-200077

Bronze orifice bearings include the bearing and the housing. They fit all Matchless wheels made before October 2023. If your wheel currently has a bronze bearing, the plastic bearing will not fit.

Front maidens are sold fully assembled, with the plastic bearing installed. See below to choose the correct maiden for your wheel.

Read Before Ordering
How to Install
Read Before Ordering

Bronze and plastic bearings are not interchangeable in the regular front maiden! The plastic bearings require a larger hole!

  • If the front maiden attaches to the mother of all (MOA) with a T knob, choose "front maiden for T knob."
  • If the front maiden attaches to the mother of all (MOA) with a quick release lever, choose "front maiden for quick release."

Once the front maiden has been replaced to the style designed for plastic bearings, you can replace just the bearing, sold here.

How to Install

To install the bearing and housing, loosen the screw on the side of the front maiden. Pop out the old bearing and housing, install the new bearing and housing, then tighten the screw.

To install the front maiden, remove the old front maiden's T knob or quick release lever. Set the new front maiden in position. Reinstall the T knob or quick release lever.