We're constantly adding new parts to this website. If you cannot find a part or do not know its name, check the Parts Finder for different ways to search.

1. Position the rear leg brace between the outside legs: place the pins in the smaller holes and align the large holes in the brace and the legs.
2. Insert a 1/4-20 barrel nut into the hole at one end of the rear leg brace; hold it in place with masking tape or a slotted screwdriver.
3. Insert a 1/4-20 x 2" Phillips truss head machine screw into an outside leg from the outer side. Tighten the screw firmly into the barrel nut.
4. Repeat steps 2 and 3 at the other end of the rear leg brace.