General Spinning Wheel Troubleshooting
The flyer won’t turn. The poly or cotton drive band is not over the flyer whorl—set the drive band in a groove of the whorl. The cotton drive band is...
The flyer won’t turn. The poly or cotton drive band is not over the flyer whorl—set the drive band in a groove of the whorl. The cotton drive band is...
If your spinning wheel is in good condition, it can be converted to a double treadle. Actual shipping charges for shipping your wheel back to you will be added to...
The Matchless and Schacht-Reeves wheels have solid wood drive wheels. The Sidekick, Flatiron, and Ladybug have nylon drive wheels, which are significantly lighter. It takes more treadling effort to set...
We introduced the Matchless spinning wheel in 1987, with a single treadle. In 1996, we began making double treadle wheels. The treadles rested on a metal treadle support. The mother-of-all...
We improved the mother-of-all (MOA) on the Ladybug and Matchless in early 2012. Updated MOAs for both wheels have a groove in the top to hold the spring and string; there's...
Try to keep the wheel in a dry, moderate climate. Try to avoid temperature extremes (i.e. keep out of direct sunlight and really damp and cold climates). Do not use...
To fix noisy bobbins use white grease lubricant (available at most hardware stores). Place the bobbin on the flyer shaft. Then place a small amount of white grease on either...
Each Schacht-Reeves wheel has a unique sequential number. It's found on the brass nameplate on the base. For our other spinning wheels, the serial number indicates the date we built...
See our video for this situation.
See your wheel's assembly manual or watch this video demonstration.
You can purchase drive bands for all Schacht spinning wheels here. Schacht-Reeves: See the assembly manual or watch this video. Matchless: See the assembly manual or watch this video. ...
To spin with a bulky bobbin, you need 3 bulky parts: a bulky bobbin, a bulky flyer, and the front maiden for your wheel. However, if you own more than...